Step-By-Step Sinus Lift I
After extraction at #15 with 9 mm offset, a 12 mm bone trimmer is used to create a dimple in the septum. When a 4x7.3 mm drill is done according to drill sequence, initial osteotomy has no palatal wall. A 4.5x10 mm dummy implant cannot engage for sinus lift. DIO Sinus Approaching drill cannot enter IS green metal sleeve. When a 4x8.5 mm drill is finished, the sinus floor is intact. This is not the case when a 2.2x10 mm drill is used. Water membrane lifter does not seal the osteotomy (palatal defect). The 4.5x10 mm dummy implant is used for sinus lift, followed by 2-3 Amalgam carriers of allograft lifted with the same implant (Fig.1,2). After 4x10 mm drill and 2-3 carriers of Vanilla graft, a 5x11.5 mm implant is placed >55 Ncm with immediate placement of a 5.7x4(2) mm abutment (Fig.3). With sticky bone and 2 pieces of PRF in the remaining socket, an immediate provisional is fabricated and seated. When the patient returns for impression nearly 6 months postop, she feels mild pain. In fact the temporary crown/abutment is loose and traps food underneath with the erythematous gingival cuff. A 5.7x4(3) mm abutment is placed and torqued without gap for impression; the implant threads are exposed distal (Fig.4 <). Retrospectively, the incompletely seated cemented abutment should be tightened ~ 1 month postop when the socket heals.
Return to
Upper
Molar Immediate Implant,
Prevent Molar Periimplantitis (Protocols,
Table),
Trajectory II,
Next Case
Xin Wei, DDS, PhD, MS 1st edition
09/03/2019, last revision
06/07/2020